RelayFax Network Fax Manager - Compatible Hardware

MDaemon Technologies welcomes reports from customers who have successfully implemented a variety of fax modems, boards and devices with RelayFax. We will work collaboratively with the customer to confirm the compatibility and document the outcome.

Email Support

RelayFax Network Fax Manager
Free Trial / Download Purchase / Renew / Upgrade

Guidelines For This Information

  • The information on this page is provided on an "as is" basis and does not imply any kind of guarantee or warranty of any kind.
  • Your use of the information on this page or materials linked from this webpage is at your own risk.
  • MDaemon Technologies reserves the right to change or update the listings on this page without notice at anytime.
  • When a customer reports an issue, MDaemon Technologies will make a committed effort to resolve any technical issues affected by RelayFax as covered by MDaemon Technologies' support policies.
  • If MDaemon Technologies concludes that the fault or defect is attributed to the use of a third party component, then MDaemon Technologies reserves the right to withhold any or all support obligations.

RelayFax 7.x - Supported Fax Boards
Manufacturer Model Notations
Gerdes PrimuX
Mainpine IQ Express (1 Port)
IQ Express (2 Port)
IQ Express (4 Port)
IQ Express (8 Port)
Commetrex M-4
M-8
M-T1
Comtrol RocketModem II PCI 4
RocketModem II PCI 6
RocketModem III PCI 4
RocketModem III PCI 8
Dialogic
(formerly Brooktrout)		 TR1034 Digital / TR1034 Analog Note: Requires special drivers, contact support for details.
TruFax 200 BRI / TruFax 200 Note: May require the -n option on faxinit. Currently, only legacy non-RoHS TruFax boards are supported.
Brooktrout SR140 host-based Fax over IP (FoIP) engine.

RelayFax 7.x - Supported Fax Modems
Manufacturer Model Identification Notations
Best Data V.92 ATI0 (56000)
ATI3 (ACF3_V1.010-V90_P21_FSH)		 Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
Conexant SoftK56 ATI0 (56000)
ATI3 (SoftK56V_B2.1_V5.03)		 Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
Creative Modem Blaster V.92 Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
DLink V.90 ATI0 (V2.210-V90_2M_DLS)
ATI3 (AC/K56)		 Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
MultiTech Systems V90 Multimodem ATI3 (LT V.90 1.0 MT5634ZBA Serial Data/Fax Modem Version 8.19j) Class: 2
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
V92 Multimodem ATI3 (LT V.92 1.0 MT5634ZBAV-V92 Serial Data/Fax/Voice Modem Version 1.28c)
AT+FMFR? (Multi-Tech Systems)
AT+FMDL? (MT5634ZBAV-V92)		 Class: 2.0
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)
U.S. Robotics V.92 ATI0 (5601)
ATI3 (U.S. Robotics 56K FAX EXT V5.4.30)		 Class: 1
Init String: AT&F&C1&D2&H1S7=55S0=0
Flow Control: Software and Hardware (CTS)
Zyxel U-1496E ATI0 (1496)
ATI3 (ZyXEL U-Modem LED enhanced)		 Class: 2
Init String: AT&F&C1&D2S7=55S0=0
Flow Control: Software
Zoom V.92/V.90 ATI0 (56000)
ATI3 (Zoom ACF3_V1.900H-V92- A Z201)		 Class: 1
Init String: AT&F&C1&D2&K3S7=55S0=0
Flow Control: Hardware (CTS)

RelayFax 7.x - Supported CAPI 2.0 Devices
Manufacturer Model Notations
AVM Fritz! card
Dialogic
(formerly Eicon Networks)		 Diva Pro 3.0 Note: This board can only send or receive a fax on 1 channel at a time. Set usable channels to 1.
Diva Server