131

How to configure LAN domains in MDaemon

This article describes the steps necessary to configure a LAN domain

Note: The only situation which would require you to configure LAN domains would be when you have a domain that is local (on the same WAN or LAN), but separate from MDaemon. You will not need to enter any domains setup in MDaemon as a LAN Domain.

To configure a LAN Domain complete the following steps.

If you have a RAS/DUN connection to the Internet complete the following steps.

From the menu bar:

  1. Click Setup
  2. Click RAS Dialup/Dialdown
  3. Click the LAN Domain tab
  4. In the New Local LAN Domain field; enter 'example.com'
  5. Click Add
  6. Click Apply
  7. Click Ok

If you are using DomainPOP and have a direct connection to the Internet or are using RAS complete the following steps.

From the menu bar:

  1. Click Setup
  2. Click DomainPOP
  3. Click the Foreign Mail tab
  4. Click the radio button Do Not Deliver Mail Addressed to Non-Local Addresses
  5. Click the Unless button
  6. Enter 'example.com'
  7. Click Add
  8. Click Ok
  9. Click Apply
  10. Click Ok

Additional Comments

Our example uses example.com as the LAN Domain. Replace this with the necessary domain name.